Epson 830p Menu, ■Contrast, Press the, ■Sharpness, ■Brightness, Signal menu, ■Color Adjustment, Adjusting Signal Settings, Adjusts the sharpness of the image

■BrightnessLightens or darkens the overall image.■ContrastAdjusts the difference between light and dark areas.■SharpnessAdjusts the sharpness of the image.■Color AdjustmentAdjusts the tint of the image (not available for RGB video images).

note

The Brightness setting changes the opacity of the projector’s LCD panels. You can also change the lamp’s brightness. Select Brightness Control in the Setting menu, then choose High or Low (the default setting is High).

Adjusting Signal Settings

Although the projector normally detects and optimizes the input signal automatically, you can use the Signal menu to make manual adjustments. In addition to changing the position of the projected image, you can correct tracking and sync for computer images, or change the aspect ratio to widescreen format for video images.

1.Press the Menu button on the remote control and select the

Signal menu.

You see a screen similar to the one below. (The settings will be different depending on the source you are projecting from.)

note

You can also use the remote control’s Auto button to automatically reset the projector’s tracking, sync, resolution, and position settings. See page 28 for details.

Fine-Tuning the Projector 63