note

If you are already using keystone settings, you see a warning message. To disable keystone settings and use Quick Corner instead, press Enter; to keep your settings, press Esc.

note

If you are not satisfied with the corrections made, press the Esc button for one second to reset the screen to its original shape.

Adjusting the Image Shape

Even if your projected image has no parallel sides, you can even up the sides using Quick Corner:

1.Press the Menu button on the remote control (or on the projector’s control panel).

2.Select the Setting menu and press Enter.3.From the Setting menu, select Keystone and press Enter.4.Select Quick Corner and press Enter. You see this screen:5.Press the Enter button to select the corner you want to adjust.

6.Use the pointer button on the remote control (or the arrow buttons on the projector) to adjust the shape.

7.Repeat steps 5 and 6 as needed to adjust any remaining corners.

8.When done, press the Esc button on the remote control or projector’s control panel to exit the menu system.

If Quick Corner remains selected in the Keystone menu, the Quick Corner screen appears whenever you press the projector’s keystone buttons. You can then follow steps 5 through 8 above to correct the shape of your image or press Esc to exit Quick Corner.

36Using the Remote Control