caution

Do not use wax, alcohol, benzene, thinner, or other chemical detergents. These can damage the case.

Cleaning the Projector Case

Before you clean the case, turn off the projector and unplug the power cord.■To remove dirt or dust, wipe the case with a soft, dry, lint-free cloth.

■To remove stubborn dirt or stains, moisten a soft cloth with water and a neutral detergent. Then wipe the case.

note

To order replacement air filters, request part number V13H134A07. See page 13 for ordering information.

Cleaning the Air Filters and Vents

Clean the air filters and air intake vents after every 100 hours of use. If they are not cleaned periodically, they can become clogged with dust, preventing proper ventilation. This can cause overheating and damage the projector.

1.Turn off the projector and unplug the power cord.

2.To clean the intake vents, use a small vacuum cleaner designed for computers and other office equipment. If you don’t have one, gently clean the vents with a soft brush (such as an artist’s paintbrush).

3.If the dirt is difficult to remove or a filter is broken, replace the filters as described on the next page. Contact your dealer or call Epson at (800) 873-7766 in the United States to obtain new ones. In Canada, please call (800) 463-7766 for dealer referral.

96Maintaining the Projector