6.Use the numeric keypad to enter a four digit password. (The default setting is 0000.)

7.When you see a confirmation message, reenter the password. Then press the Menu button to exit the screen.

8.Press the Num button on the remote control to deactivate the numeric keypad.

9.If you want to disable the password temporarily, select Timer and press Enter. Then hold down the Num button while you use the numeric keypad to enter the number of hours (from 0 to 9999) that you want the password feature disabled. If you want the projector to request the password every time it is turned on, set the timer to 0H.

The countdown for the elapsed time begins as soon as you close the Password Protect menu. (You can check the elapsed time in this menu next to Time elapsed.)

10.To enable your screen logo, select User’s Logo Protect and press Enter. Select ON and press Enter.

When this feature is on, the logo appears whenever you turn on the projector (if the Startup Screen is enabled in the Extended menu; see page 71). It also appears when you press the A/V Mute button (if you selected the Logo as the Background Color in the Extended menu). None of the User’s Logo features in the Extended menu can be changed when the User’s Logo Protect function is enabled.

note

It’s a good idea to write down your password and keep it in a safe place.

Fine-Tuning the Projector 69