Epson 830p Controlling the Picture and Sound, 34Using the Remote Control, Switching Between Picture Sources, On the remote control, there are four

note

You can use the projector’s menus to fine-tune the picture and sound quality as described on page 59.

Source buttons

Controlling the Picture and Sound

You can use the remote control to preview and select your picture sources, temporarily turn off the picture and sound, freeze the action, zoom in on the picture, display a picture-in-picture image, and adjust the volume.

Switching Between Picture Sources

If your projector is connected to more than one computer and/or video source, you can switch between the different sources:

■The easiest way to select your source is to press the Source Search button on the remote control or projector repeatedly until you see the image you want on the screen.

■On the projector’s control panel, there are two other Source buttons: Press the Computer/Component button to switch between equipment connected to the Computer/Component ports, or press the Video/S-Videobutton to switch between equipment connected to the Video and S-Videoports.

■On the remote control, there are four Source buttons. Use them to switch between equipment connected to the port identified on each button.

After you select a source, the screen goes dark for a moment before the image appears.

34Using the Remote Control