Epson 830p Press, Press the, You see this screen:, Resetting the Lamp Timer, 5.Press Esc or Menu to exit, 4.Select Yes and press Enter

11.Once the lamp is fully inserted, tighten its screws and replace the cover, then tighten the cover screw. (The projector won’t come on if the lamp cover is loose.)

12.Reset the lamp timer as described in the next section.Resetting the Lamp Timer

After you replace the lamp, you need to reset the lamp timer using the projector’s menus.

1.Press the Menu button on the remote control or the projector’s control panel. You see the main menu.

2.Use the pointer button on the remote control (or the arrow buttons on the projector) to highlight Reset, then press Enter.

You see this screen:

3. Select Lamp-Hours Reset and press Enter. You see this prompt:4.Select Yes and press Enter.

5.Press Esc or Menu to exit.

Maintaining the Projector 99