Epson 830p Using the Menu System, Use the, 60Fine-Tuningthe Projector, To display the menu screen, press the, 4.After highlighting the option you want to adjust, use the

Using the Menu System

You can use the remote control or the projector’s control panel to access the menus and change settings. Follow these steps:

1.To display the menu screen, press the Menu button. You see a menu screen similar to the one below:

Options

Menu list

- +

ON OFF

The menus are listed on the left and the options available for the highlighted menu are shown on the right.

2.Use the pointer button on the remote control (or the arrow buttons on the projector) to scroll through the menu list. When

you’ve highlighted the desired menu, press the Enter button to select it.

3.Once you’ve selected the menu, use the pointer button to scroll through the list of options. (Some of the options may be

grayed out or unavailable, depending on the selected source.)4.After highlighting the option you want to adjust, use the

pointer button to change the setting. In some cases, you may have to press the Enter button to view a submenu for changing the setting.

■Press the left or right side of the pointer button to adjust a slider bar.

■To select from two or more settings, use the pointer button to highlight the desired setting and press Enter.

60Fine-Tuning the Projector