6.Turn on the printer, and use the LF/FF button to advance the paper to the pull tractor.

Now follow steps 4 through 11 starting on page 4-6.

Removing the pull tractor

You’ll need a cross-head screwdriver and the paper separator that was originally installed on the printer.

1.Remove any paper installed on the tractor and turn off the printer.

2.Open the top cover and locate the levers that lock the pull tractor in place on the printer. Pull these levers forward to release the pull tractor. Then lift the tractor up and out of the printer.

4-12 Using the Printer Options