Note:

The paper memory feature is available only with the front tractor.

Caution:

When using overlapping multi-part forms, do not press the TEAR OFF, FRONT/REAR, TOP OF FORM or reverse-feeding (bottom) MICRO FEED button or a paper jam may result. To remove these forms, tear off the fresh supply at a perforation below front tractor and press the LF/FF button to eject the remainingforms.

Saving paper memory settings

This procedure requires setting several DIP switches. See the section on changing DIP-switch settings earlier in this chapter.

1.Make sure the printer is turned off.

2.Turn DIP switch 3-4 off to save your settings for memory number 1 or on for memory number 2.

3.Select the page length by turning DIP switches 3-1 and 3-2 on or off as shown below.

Page length

SW 3-1

SW 3-2

 

 

 

 

11

inches

OFF

OFF

 

 

 

 

12

inches

OFF

ON

 

 

 

 

8.5

inches

ON

OFF

 

 

 

70/6 inches

ON

ON

 

 

 

 

4.Select the paper type by turning DIP switches 3-5 and 3-6 on or off as shown below.

3-20 Using the Printer