MICRO FEED

These two buttons advance or reverse the

 

loaded paper in 1/216-inch increments.

 

You can use these buttons to adjust the

 

top-of-form, tear-off, and printing

 

positions.

 

To reset the top-of-form position, press

 

the TOP OF FORM button to enter

 

top-of-form mode. Then use the MICRO

 

FEED buttons to move the paper to the

 

desired position. See the section on

 

adjusting the top-of-form position in

 

Chapter 2.

 

To reset the tear-off position, press the

 

TEAR OFF button to enter tear-off mode

 

and feed the paper to the tear-off position.

 

Then use the MICRO FEED buttons to

 

move the paper to the desired position.

 

See the section on adjusting the tear-off

 

position in Chapter 2.

 

To adjust the printing position, press

 

either MICRO FEED button to advance or

 

reverse the paper to the desired position.

 

See the section on adjusting the printing

 

position in Chapter 2.

 

These buttons are also used for the paper

 

memory feature described later in this

 

chapter.

Caution:

When using labels, use only the top MICRO FEED button. Never feed labels backward through the printer.

Using the Printer 3-5