As the colours of the wires in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows:
The green and yellow wire must be connected to the terminal in the plug which is marked with the letter E or
the earth symbol
or coloured green or green and yellow.The blue wire must be connected to the terminal in the plug marked with the letter N or coloured black.
The brown wire must be connected to the terminal in the plug marked with the letter L or coloured red.
If damage occurs to the plug replace the cord set or consult a qualified electrician.
Replace fuses only with a fuse of the correct size and rating.Important Safety Instructions
Read all of these instructions before you set up your printer.Follow all warnings and instructions marked on the printer.Unplug the printer from the wall outlet before you clean it, and use a damp cloth for cleaning, not liquid or aerosol cleaners.
Do not use your printer near water or spill any liquid on it.Do not place the printer on an unstable cart, stand, table, or other surface that may allow the printer to fall.