LF/FF/LOAD

TEAR OFF

LF advances paper one line at a time. To feed your paper one line, press this button once.

FFadvances the paper to the top of the next page. To use this feature, press and hold the button for about one second.

LOAD loads paper on the push tractor of the selected paper path when no paper is currently loaded.

This button can also be used to run the printer’s draft self test. See the section on running the self test in Chapter 1.

Feeds the paper to the printer’s tear-off edge and puts the printer in tear-off mode.

If the perforation of your paper does not align exactly with the printer’s tear-off edge, use the MICRO FEED buttons to adjust the tear-off position. See the section on adjusting the tear-off position in Chapter 2.

This button can also be used to run the printer’s NLQ self test. See the section on running the self test in Chapter 1.

Caution:

Never use the TEAR OFF button with labels. Use the LF/FF button instead to feed the printed labels to a point where they can be torn off

3-4 Using the Printer