Page type | SW 3-5 | SW 3-6 | |
Normal paper | OFF | OFF | |
| | | |
Multi-part forms with labels | OFF | ON | |
| | | |
Overlapping multi-part forms | ON | OFF | |
| | | |
Overlapping multi-part forms with labels | ON | ON | |
| | | |
5.For overlapping multi-part forms without a label, hold down both MICRO FEED buttons and turn on the printer. The printer saves the overlapping form information in the memory area you selected. When the information is saved, the printer beeps and is then ready to print. You have now finished all steps for saving information on overlapping multi-part forms without a label.
For regular and overlapping multi-part forms with a label, hold down both MICRO FEED buttons and turn on the printer. The printer beeps. Press the LF/FF/LOAD button to load the forms. The printer loads and checks the forms. When the check is finished, the printer beeps continuously until you open the top cover in the next step.
6.Open the printer cover.7.Move the pointer (the point where the two lines intersect) to the label’s upper left comer. Use the MICRO FEED buttons to move the paper up or down and manually move the print head left or right.