Using the Pull Tractor
The optional pull tractor (#8309) provides optimum continuous paper handling. The pull tractor is especially useful with continuous multi-part forms and labels. When the pull tractor is installed, the tear-off feature is not available. For best results, use the pull tractor with either the printer’s front or rear built-in tractor, as described in this section.
Installing the pull tractor
To install the pull tractor, you need a cross-head screwdriver.
Note:
If you are going to be using the pull tractor with the built-in rear tractor, you should load paper onto the rear tractor before installing the pull tractor. See the section on loading paper onto the rear tractor in Chapter 2.
1.Turn off the printer and open the paper separator cover.
4-2 Using the Printer Options
