14.Check the PAPER SELECT indicator to see which tractor is selected:
If the rear tractor arrow is lit, press the LF/FF/LOAD button to load the paper.
If the front tractor arrow is lit, press the FRONT/REAR button to switch to the rear tractor. When the printer switches tractors, it also loads the paper automatically.
15.The paper is now loaded to the top-of-form position. If it looks like the printing will start too high or low on the page, see the next section for instructions on adjusting the paper position.
Adjusting the Paper Position
You can adjust the top-of-form position as well as the printing position at any point on the page by using the TOP OF FORM and MICRO FEED buttons. The printer then remembers the new top-of-form position. When you use the optional pull tractor, you can adjust the paper position in the same way as described below.
2-10 Loading and Using Paper
