The printer advances paper to the tear-off position only when the printer receives a full page of data or a form feed command and no more data is received for three seconds.

1.Make sure the printer is turned off.2.Turn DIP switch 3-8 on.3.Turn the printer on.

When tear-off mode is on and you print on continuous paper on the push tractor, the printer advances the final printed page to the tear-off position. Then you can tear off all printed pages.

If the perforation is not aligned with the tear-off edge, adjust the tear-off position as described in the section on adjusting the tear-off position.

When you resume printing, the printer automatically feeds the paper back to the loading position and begins printing.

Loading and Using Paper 2-15