Customizing Projector Features
Use the settings in this section to adjust the image size and position, suppress
Image Sizing
Before adjusting any of these settings, make sure you have already selected an appropriate aspect ratio for the type of picture you’re viewing (see page 30).
■Overscan
Signal > Advanced > Overscan
Note: This option may not be available depending on the video device connected to the projector.
For component and HDMI video formats, this setting lets you see the edges of the image that are not normally visible in the picture (see page 89). If you see interference when you set Overscan to Off, try adjusting the Position as described below.
Note: The Auto setting is only available when the input source is HDMI1, HDMI2, or WirelessHD.
■Position
Signal > Position
Note: This setting cannot be used with a signal input through the HDMI 1 or HMDI 2 port or the WirelessHD connection (PowerLite Home Cinema 3020e only).
Use the arrow buttons to
■Aspect
Signal > Aspect
This setting lets you change the aspect ratio of your image, and works the same as pressing the Aspect button on the remote control. See page 30 for more information.
Note: When displaying 720p, 1080i, or 1080p signals through the HDMI or Component video port, the aspect ratio is automatically selected by the source device and you cannot change it.
If you display a 4:3 image using the Zoom setting, the top and bottom will be cut off. You can use the Zoom Caption Pos. option and other settings to resize and reposition the image.
For details on how the projector resizes the picture when you choose an Aspect setting, see page 89.
56 Making Detailed Adjustments
