When you connect an HDMI cable to the projector, it is recommended that you fasten it with the included cable clip. Follow these steps to install the cable clip:
1.Connect the HDMI cable to one of the HDMI ports on the projector.
2.Insert the end of the cable clip anchor into the cable clip hole near the HDMI port, as show below.
3.Place the open cable clip around the HDMI cable, but don’t lock it into place.
4.Slide the cable clip towards the projector and lock the clip onto the HDMI connector.
To remove the cable clip, unlock the clip and disconnect the HDMI cable. Then pinch the side of the cable clip anchor and carefully pull it out of the cable clip hole.
