■Direct Power On
Extended > Operation > Direct Power On
Sets projection to start without pressing the P power button on the projector or the On button on the remote control.
Note: When Direct Power On is enabled, power surges that occur after a power outage can cause the projector to turn on.
■Video Signal
Extended > Input Signal > Video Signal
Leave this setting on Auto so the projector can automatically interpret the format, such as NTSC or PAL (for standard TV formats).
■Component
Extended > Input Signal > Component
Change this setting to match the type of equipment connected to the Component port. For component video, select Auto to let the projector automatically interpret the signal; or select YCbCr or YPbPr to manually select your video equipment’s signal.
■Illumination
Extended > Operation > Illumination
Turn off this setting to deactivate the lights on the projector’s P power button and power light. Use this setting if you find the lights distracting in a darkened room.
■Sleep Mode
Extended > Operation > Sleep Mode
Turn off this setting if you don’t want the projector to enter sleep mode. (Sleep mode shuts the projector off automatically when there is no video signal.)
Select 5min., 10min., or 30min. as the length of time before shutoff; decreasing the time conserves power and extends the life of the lamp. 30min. is the default setting.
To turn the projector back on, press the P power button on the projector or the On button on the remote control.
■Child Lock
Settings > Lock Setting > Child Lock
Lets you lock the P power button on the projector’s control panel to make it more difficult for a child to turn on the projector. See page 40 for more information.
58 Making Detailed Adjustments
