3. Follow the on-screen messages.
The
P power light flashes while the printer performs the
cleaning cycle. This operation takes about two minutes to
complete.
cCaution:
Never turn off the printer while the
P power light is
flashing. Doing so may damage the printer.
4. When the
P power light stops flashing, click Print nozzle
check pattern in the Head Cleaning dialog box and use
the pattern to confirm that the head is clean and to reset the
cleaning cycle.
Nozzle check pa ttern:
The above sample is in black and white, but th e actual check pattern
prints in color.
In the check pattern, if you find that any segments are missing
from the test lines, you may need to repeat the head
cleaning and print the nozzle check patter n again.
If print quality does not improve after repeating this procedure
four or five times, foll ow the recommendations liste d in
this chapter. If the print quality still does not improve,
contact your dealer.
pattern1
PATTERN2
8
Troubleshooting
R
Comoro-W
Rev.C
A5 size Chapter 8
12-12-97 DR, pass 0
Troubleshooting 8-31