Using Your Printer on a Network

With Windows 95

To use your printer over a network with Windows 95, you
must set up the computer to which the printer is connected (the
print server) and also set up the other computers on the
network which will use the computer (the client computers).
To set up the print server so that the printer is shared across the
network, see your Windows 95 documentation.
The instructions below explain how to set up your Windows 95
as a client computer to use your printer, after you have set up
the print server.
1. Make sure your printer software is installed (see page 2-13 if
it is not installed).
2. Double-click the My Comp uter icon.
3. Double-click the Printers folder.
4. Right-click the icon of your printer, and click Properties.
5. Click the Details tab. Then click the Add Port button.
Click this tab.
Then click here. net700
LComoro-W
Rev.C
A5 size Chapter 2
12-12-97 DR, pass 0
2-20 Getting Started