Choosing a Place for the Printer Follow the guidelines listed below when placing your printer.
Place the printer on a flat, stable surface. The printer will
not operate properly if it is tilted or at an angle.
Place the printer close enough to the computer for the
interface cable to reach it easily.
Leave adequate room for easy operation and maintenance.
Leave enough ro om on the table at the front of the printer
to lower the output tray.
Avoid using or storing the printer in places subject to rapid
changes in temperature and humidity. Also keep it away
from direct sunlight, strong light, or heat sources.
Avoid places subject to shocks and vibrations.
Place the printer near a wall outlet where the plug can be
easily unplugged.
Note for French-speaking users:
Placez l’imprimante près d’une prise de contacte où la fiche peut
être débranchée facilement.
Avoid electrical outlets controlled by wall switches or
automatic timers. If you must use electrical outlets
controlled by wall switches, do not use the wall switches to
control them. Also, avoid outlets on the same circuit as
large motors or other appliances that can cause fluctuat ions
in line voltage.
Keep the entire computer system away from potential
sources of electromagnetic interference, such as
loudspeakers or the base units of cordless telephones.
Use a grounded power outlet; do not use an adapter plug.
2
R
Comoro-W
Rev.C
A5 size Chapter 2
12-12-97 DR, pass 0
Getting Started 2-3