3. Click OK to save your settings.
Note:
If you want the Status Alert dialog box to appear in front of other
windows on the desktop, right-click the background monitoring icon
and choose Show on Top.
Installing the Status Monitor 2 utility
Note:
If you installed the Status Monitor 2 utility when you installed the
printer software, you do not need to install it again.
To use the Status Monitor 2, you need to install the software as
described below:
1. Make sure Windows 95 is running. Insert the printer software
CD-ROM in the CD-ROM driver (if you are using f loppy
disks, insert the floppy disk in the floppy disk drive).
2. If a dialog box appears, click Quit.
3. Click Start, and select Run.
4. Type D:\ and specify your preferred language (see page 2-16)
followed by \status2 in the box.
If you inserted the CD in a drive other than drive “D”,
substitute the appropriate letter.
If you use the floppy disk version, substitute the letter of
the floppy disk drive.
5. Click OK. The installation starts. Follow the instructions on
the screen.
4
R
Comoro-W
Rev.C
A5 size Chapter 4
12-12-97 DR, pass 0
Using the Printer Software for Windows 4-29