EPSON Stylus Photo 750

Revision B

5.3 Adjustment by Adjustment Program

In this printer, it is necessary to set the correct information for each printer mechanism in order to maintain consistent printing function and quality, eliminating difference of each printer mechanism’s characteristics. Therefore, in case that the combination of the printer mechanism and main board changes or the print head is replaced during the repair service, you must set and save the correct information to the main board, using the exclusive adjustment program.

5.3.1 Adjustment Program

This adjustment program(Sp750.EXE) consists of the menu to input the model name and main menu for adjustments.

P r o m p t - S P 7 5 0

A u t o

a d j 1

You have to go through the menu to input the

C A U T I O N

model name in order to go to the main menu.

If the control board is replaced, it is necessary to input the model name.

5.3.1.1How to use the Adjustment Program

1.Connect the PC(DOS/V computer) and printer by the parallel interface cable, and turn on the printer, then, turn on the computer.

2.Either copy the adjustment program file to the hard disk of the computer or insert the disk of adjustment program to the floppy disk drive.

3.On the MS-DOS Prompt screen, type the program file name(Sp750) and press return key.

5.After setting the model name, program goes to the destination menu.

Pr o m p t - S P 7 5 0

A u t o

4. Following screen appears and press Enter key.

a d j 2

Adjustment

Adjustment by Adjustment Program

80

Page 85
Image 85
Epson Photo750 manual Adjustment by Adjustment Program, How to use the Adjustment Program