Epson Photo750 manual Head Angular Adjustment, Screw position for fixing the print head

EPSON Stylus Photo 750 Revision B

5.3.4 Head Angular Adjustment

During production, slight variations are created in print heads and carriage (which are used as a print head base). If these differences are not adjusted, they can adversely influence the print head angle, and result in the poor print quality.

1.Select “Adjustment” on the main menu and press Return key. Program goes to the Adjustment menu.

2.Select “Head Angular Adjustment” and press Return key.

Pr o m p t - S P 7 5 0

A u t o

a d j 1 1

3.Loosen the screw fixing the print head. (See Figure 5-4, "Screw position for fixing the print head")

4.Select “Print the Head Angular Adjustment Pattern”, and press Return key. Then, the printer prints “Head Angular Adjustment Pattern”.

Carriage	Screw for
	fixing the print
Assembly
	head

Figure 5-4. Screw position for fixing the print head

P r o m p t - S P 7 5 0

A u t o

a d j 1 2

Adjustment Adjustment by Adjustment Program 84