Epson Photo750 manual Roller, Assembly, PF Removal, Roller, Assembly, Paper Exit Removal

EPSON Stylus Photo 750 Revision A

4.2.5.10 Roller, Assembly, PF Removal

1.Remove the upper housing.(See “Housing Removal” on page -54)

2.Remove “Carriage, Assembly”. (See “Carriage Assembly Removal” on page -68)

5.Remove “Torsion Spring,117.6” from the frame and remove 6 pieces of “Paper Guide Assembly, Upper”.

6.Remove “Paper Guide, Front;B”, releasing its hook.

P A P E R G U I D E , F R O N T

3. Remove “PE Sensor Assembly”. (“PE Sensor Assembly Removal” on page -70)

4. Remove 2 screws securing “Guide board, Cable” to the printer mechanism, then remove “Guide Board, Cable”.

P A P E R G U I D EP, ALPE EF TR G U I D E , A S S E M B L Y , U P P E R R O L L E R , A S S E M B L Y , PA P ER E X I T

G U I D E P L A T E , C A BL E

( 6

S H A F T , P A P E R G U I D E , U P P E R

T O R S I O N S P R I N G , 1 1 7 . 6

p ie c e s )

Figure 4-23. “Roller, Assembly, Paper Exit” Removal

7. Release the locks of right and left shaft supports for the “Roller Assembly, Paper Exit”, and remove the “Roller, Assembly, Paper Exit”.

	8. Unlock and release the left shaft support of “Roller, Assembly, PF”,
	and match the cut out of the frame shaft and protrusion of the shaft
Figure 4-22. “Paper Guide, Assembly” Removal	support.

Disassembly and Assembly Disassembly 71