EPSON Stylus Photo 750

Revision B

5.3.7 Initial Ink Charge

There is no ink charged in the ink path of a spare print head and printer mechanism. Therefore, after you replace any of the following units, perform initial ink charge and return the printer after making sure that ink is ejected correctly from the print head. Perform initial ink charge at the following cases.

After replacing the printer mechanism

After replacing or removing the print head

1.Select “Maintenance” on the main menu and press Return key. The screen goes to the Maintenance Menu.

2.Select “Initial Charge Flag Reset” and press Return key. Then, the screen goes to the “Initial Ink Charge Check Menu”.

P r o m p t - S P 7 5 0

A u t o

Pr o m p t - S P 7 5 0 A u t o

a d j 1 8

3.If you wish to perform the initial ink charge, press Return key. If not, press ESC key.

CA U Initial ink charge is performed, when the printer, which is left at least 10 seconds after turning the

power Off, is turned back On again.

Since this operation consumes large amount of ink, do not perform unnecessarily.

It takes about 2 minutes to complete the initial ink charge.

a d7 j 1

Adjustment

Adjustment by Adjustment Program

88

Page 93
Image 93
Epson Photo750 manual Initial Ink Charge