4.1.10 Alarm
In this menu, the alarm reactions for input contacts are defined.
RELAY | OFF/ON |
| It is possible to switch the output relay remotely with |
|
|
| this menu item for test purpose: |
|
|
| ON: output relay switched |
|
|
| OFF: output relay not active (off) |
INPUT1...3 | PRESET x | Assignment of the preset position which is linked to | |
|
|
| alarm input. |
|
|
| Select preset position 1~32. |
OUTPUT | OFF/ON |
| ON: the camera will go to preset [assigned preset |
|
|
| position in lines above] in case of alarm. |
|
|
| In case of alarm, the camera moves to the |
|
|
| defined preset and stays there until manual |
|
|
| PTZ control or any programmed AUTO |
|
|
| RESUME function is carried out |
|
|
| OFF: no reaction in case of active alarm input |
RETURN |
|
| Return to main menu. |
4.1.11 Initialize |
|
|
|
POWER ON RESET |
|
| ON: performs a PTZ initialization similar to power on |
|
|
| OFF: returns to INITIALIZE menu |
CAMERA DEFAULT |
|
| ON: reset of the camera module to factory settings |
|
|
| OFF: returns to INITIALIZE menu |
FACTORY DEFAULT |
|
| ON: reset of the pan/tilt electronics module to factory |
|
|
| settings |
|
|
| OFF: returns to INITIALIZE menu |
LENS REFRESH x DAYS | OFF, | Frequent initialization of zoom lens for better stability | |
|
| 1...15 | and preset precision. |
|
|
| OFF: no frequent initialization |
|
|
| 1...15: interval in days for initialization |
CAMERA REFRESH x DAYS | OFF, | Frequent initialization of pan/tilt mechanism for better | |
|
| 1...15 | stability and preset precision. |
|
|
| OFF: no frequent initialization |
|
|
| 1...15: interval in days for initialization |
37 | EPTZ100_ma_en_rev03.doc |
