Manuals / Brands / Photography / Security Camera / EverFocus / Photography / Security Camera

EverFocus EPTZ 100 4.1.3 Main menu , 4.1.4 System info , 4.1.5 Display

1 48

Download 48 pages, 1.79 Mb

EPTZ100_ma_en_rev03.doc 26

4.1.3 Main menu

After opening OSD setup the MAIN menu is shown at the screen:

MAIN MENU

SYSTEM INFO

DISPLAY

CAMERA

SCAN

CONTROL

PRIVACY MASK

ALARM

INITIALIZE

EXIT

Select a menu item with UP/DOWN, RIGHT will open submenu.

NOTE: The OSD menu has a timeout function. After 2 minutes with no activity, the OSD menu will close

automatically.

4.1.4 System info

This menu shows the camera type, firmware version and communication settings.

There are no editable items in this menu.

SYSTEM INFO

TYPE EPTZ100

FIRMWARE 709M809Q

BAUD RATE 9600

RS-485 ID 1

PROTOCOL EVERFOCUS

4.1.5 Display

The settings in this menu define the overlay displays of the camera.

CAMERA ID Shows the RS-485 ID on the screen:

ON: display of RS-485 ID

OFF: no display of RS-485 ID

CAMERA NAME With setting ON, a camera title with up to 16 characters can be entered.

ON: display of camera title (with option for edit)

OFF: no title display

PRESET NUMBER ON: display number of active preset

OFF: no preset number display

PRESET NAME ON: display of a freely editable title (up to 16 characters) of the preset

(available for presets 1 ~ 32)

OFF: no display of preset name

PTZ POSITION ON: show coordinates for pan and tilt in degrees and zoom ratio

OFF: no PTZ position display

RETURN Returns to main menu

Contents

Main EPTZ 100 Day / Night Speed Dome Camera INSTALLATION / OPERATION 1 SAFETY WARNINGS TABLE OF CONTENTS Page 2 INTRODUCTION 2.1 FEATURES 2.2 DELIVERY SCOPE 2.3 OPTIONAL ACCESSORIES 2.4 SPECIFICATIONS Page 2.5 DIMENSIONS 2.5.1 Dimensions with ceiling mount adapter 2.5.2 Dimensions with recessed ceiling mount adapter 2.5.3 Dimension EPTZ 100 with wall mount bracket EPTZ 100 WLM 2.5.4 Dimensions wall bracket EPTZ 100 WLM 2.5.5 Dimension EPTZ 100 with ceiling pendant bracket EPTZ 100 CPM 2.5.6 Dimension ceiling pendant bracket EPTZ 100 CPM 3 INSTALLATION 3.1 MECHANICAL 4 5 2 3.1.1 Ceiling mount 3 4 5 3.1.3 Wall mount 2 8 3 4 7 5 3.1.4 Ceiling pendant mount 3.2 ELECTRICAL 3.2.1 Video 3.2.2 Power 3.2.3 RS-485 3.2.3.1 RS-485 installation with EKB 500 keyboard 3.2.3.2 RS-485 installation with EverFocus DVR 3.2.4 Alarm 3.3 COMMUNICATION SETTINGS 3.3.1 Baud rate and Protocol 3.3.2 RS-485 ID (address) Page 3.3.3 RS-485 bus termination 3.4 INITIAL START 4 OSD MENU SETUP 4.1.1 Operation in Setup Menu 4.1.2 Menu Structure OSD Structure Part 1: Page 4.1.3 Main menu 4.1.4 System info 4.1.5 Display 4.1.6 Camera 4.1.6.1 Advanced setting (camera setup) Page Page Page 4.1.7 Scan Page Page Page 4.1.8 Control 4.1.9 Privacy Mask 4.1.10 Alarm 4.1.11 Initialize 5 OPERATION WITH EKB 500 KEYBOARD 5.1 EKB 500 OPERATION WITH EVERFOCUS PROTOCOL (EVF-2) 5.1.1 EPTZ 100 setup menu 5.1.2 Preset positions 5.1.3 Autopan 5.1.4 Preset tours 5.1.5 Pattern tours 5.1.6 Remote switching of EPTZ 100 output relay 5.2 EKB 500 OPERATION WITH PELCO-D/P PROTOCOL 5.2.1 EPTZ 100 setup menu 5.2.2 Preset positions 5.2.3 Autopan 5.2.4 Preset tours 5.2.5 Pattern tours 5.2.6 Remote switching of EPTZ 100 output relay 6 APPENDIX A: BASIC SETTINGS AT EKB 500 KEYBOARD 6.1 COM PORT SETTING - RS-485 INTERFACE SETTING 6.2 DEVICE SETTING > CAMERA 7 APPENDIX B: BASIC SETTINGS AT EVERFOCUS DVR 7.1 EDR / EDVR / EDSR SERIES (EXCEPT EDSR100, EDSR100H) 7.2 ECOR / PARAGON SERIES 8 APPENDIX C: TROUBLESHOOTING 8.1 GENERAL MALFUNCTION 8.2 RECOVERING COMMUNICATION SETTINGS OF CAMERA MODULE EverFocus Electronics Corp.