EPTZ100_ma_en_rev03.doc 27
4.1.6 Camera
This menu provides the camera video settings.
CAMERA
ZOOM SPEED Zoom speed setup in 8 possible levels:
Level 1: slowest to Level 8: fastest
ADVANCED SETTING Opens submenu for camera features (following chapter)
RESCUE MODE Mode for recovering serial communication between speed dome and camera
module. This mode is not needed for normal setup. Keep setting OFF.
For details consult APPENDIX C: Troubleshooting
BAUD RATE Baudrate display for RESCUE MODE. This parameter is not needed for normal
setup.
For details consult APPENDIX C: Troubleshooting
PARITY Display of parity setting for RESCUE MODE. This parameter is not needed for
normal setup.
For details consult APPENDIX C: Troubleshooting
RETURN Returns to main menu
4.1.6.1 Advanced setting (camera setup)
NOTE: This menu and its submenus require an operation different from the other EPTZ 100 OSD menus:
Switch between the settings: J
J
JO
O
OY
Y
YS
S
ST
T
TI
I
IC
C
CK
K
K
Switch to submenu / enter: I
I
IR
R
RI
I
IS
S
S
+
+
+
Leave the menu: Menu item "EXIT", confirm with I
I
IR
R
RI
I
IS
S
S
+
+
+
MAIN SETUP
CAM TITLE Alternative camera title display option. Please leave this setting OFF and use
"CAMERA NAME" in DISPLAY menu for editing / displaying camera title
WHITE BAL White Balance mode:
ATW Auto-tracking white balance. ATW continuously checks the whole image,
weights all colours in the picture and updates the white level and colour
temperature which is suitable for constantly changing scene.
2 options are available for ATW indoor and outdoor. Indoor mode tends
to be more blue and outdoor mode adds more red to the whole image.
AWC Auto white balance. Camera will make colour calibration of the picture
for once and keep the colour temperature until the next command is
given. To refresh the colour, a manual trigger needs to be done to the
AWC when shown on the display.
Manual Manual adjustment of colour preference. With manual setting, the colour
temperature can be fixed which can be suitable for indoor and static
environment.
If the lighting is Tungsten or similar (more natural), try to either add