EverFocus EPTZ 100 manual Patrol Tour, ALL Preset Tour, Group 1 Tour, Group 2 Tour, Group 3 Tour

5.2.3 Autopan

The speed for autopan function is programmed in the OSD menu; the entered value for speed in EKB 500 will be ignored at start of autopan.

Activate A-B autopan (pan/tilt between 2 points)

A..PAN (Pelco-P only)

Alternative:

POSIITIION > 99 > ENTER

5.2.4 Preset tours

EPTZ 100 provides 7 different preset tour modes. All tours are defined in the OSD setup menu.

PATROL TOUR:	Preset tour with up to 16 selected presets.
ALL PRESET TOUR:	Preset tour with all available presets.
GROUP 1 TOUR:	Preset tour with presets 1~4
GROUP 2 TOUR:	Preset tour with presets 1~4
GROUP 3 TOUR:	Preset tour with presets 1~4
GROUP 4 TOUR:	Preset tour with presets 1~4
TOUR SCAN:	Preset tour with defined preset GROUPS

POSIITIION > [number] > ENTER

Tour numbers:	[68] TOUR SCAN
	[69]	PATROL TOUR
	[70 or 98] ALL PRESET TOUR
	[71]	GROUP 1 TOUR
	[72]	GROUP 2 TOUR
	[73]	GROUP 3 TOUR
	[74]	GROUP 4 TOUR

Camera:0001 goto Position:__[1-192]

5.2.5 Pattern tours

EPTZ 100 provides 4 programmed pattern tours with up to 10 minutes duration each. The pattern tours are started with the POSIITIION key.

POSIITIION > [number] > ENTER

Numbers:	[75]	Pattern 1
	[76]	Pattern 2
	[77]	Pattern 3
	[78]	Pattern 4

Camera:0001 goto Position:__[1-192]

43 EPTZ100_ma_en_rev03.doc