4.1.7 Scan
This menu contains all setup options for automatic dome modes such as autopan, preset tours and pattern.
SCAN
AUTO PAN
ALL PRESET
GROUP SCAN
TOUR SCAN
PATROL
PATTERN
AUTO PAN | PAN/TILT | This autopan mode performs pan and tilt movements between 2 |
|
| points. The vertical movement will be processed in programmed |
|
| speed from start / end point, the resulting movement is shown if |
|
| the schema below: |
START | Left autopan limit. Move to the position and press |
| IRIS - to store the start point. |
END | Right autopan limit. Move to the position and press |
| IRIS - to store the end point. |
SPEED | Autopan speed, range from 2 (slowest) to 180 |
| (fastest). |
DWELL | Dwell time at start and end position, adjustable |
| 1~45 seconds. |
RUN | Autopan start (this function will close OSD menu) |
RETURN | Return to AUTO PAN menu. |
PAN ONLY This autopan mode performs a horizontal movement between 2 points.
START | Left autopan limit. Move to the position and press |
| IRIS - to store the start point. |
END | Right autopan limit. Move to the position and press |
| IRIS - to store the end point. |
SPEED | Autopan speed, range from 2 (slowest) to 180 |
| (fastest) |
DWELL | Dwell time at start and end position, adjustable |
| 1~45 seconds. |
RUN | Autopan start (this function will close OSD menu). |
31 | EPTZ100_ma_en_rev03.doc |
