EverFocus EPTZ 100 Special, User Preset, Privacy, Day/Night, Sync, Comm ADJ, Image ADJ, Reset

SPECIAL	Submenu for advanced camera functions:
	USER PRESET	Not supported by EPTZ 100
	PRIVACY	Keep OFF setting, privacy mask setup is done in the
		PRIVACY MASK menu, available in the main menu
	DAY/NIGHT	Modes of the day/night switching:
		B/W : black/white (night) mode, IR cut filter switched off
		COLOUR: colour (day) mode, IR cut filter switched on
		AUTO1: day/night switching with short delay time
		AUTO2: day/night switching with longer delay time
	SYNC:	Synchronization mode, fixed at INTERNAL mode
	COMM ADJ	Communication settings for camera interface

ATTENTION:

Do not change any value in this submenu!

Keep default settings:

CAM ID	0
DISP CAM ID	OFF
BAUD RATE	38400
UART MODE	8-N-1
RET PKT	ENABLE

If these settings are changed for whatever reason, the communication between dome electronics and camera menu will be broken. In this case consult APPENDIX C for recovering camera module communication settings.

	IMAGE ADJ	FREEZE: Store ("freeze") current video image
		H-REV: Flips the image horizontally
		V-REV: Flips the image vertically
		SHARPNESS: Image sharpness adjustment in the range
		1 ~ 30
		COLOUR GAIN: Colour saturation adjustment in the
		range 1~ 50
	END	Return to CAMERA ADVANCED SETTING page
RESET	Reset of the camera parameters to factory defaults.
EXIT	Return to CAMERA menu.

30 EPTZ100_ma_en_rev03.doc