NOTE: The installation must conform to national and local building and electrical codes, and

UL requirements. See the device user guides for details.

1. — Install the Mud Rings

NOTE: These devices can be installed using the

supplied mud ring or a wall box. If installing

a box, allow enough depth for the plate, and

the cables. The box should be at least 2.5

inches (6.4 cm) deep to accommodate the

connectors and cables.

If a suitable wall box is already installed, follow

step 2 onwards.

a.Using the mud ring as a template, trace the inside of the mud ring onto the mounting surface.

b.Cut out the material within the marked area.

c.Insert the mud ring into the opening. The mud ring locking arms should fit easily into the opening. Flip over the mud ring locking arms and secure with the screws provided.

TIP: Use a level when fitting the mud ring.

Repeat steps a to c for each additional input wall plate that needs to be installed.

Wall

Wall Mounting

Mud Ring

ÛInsert the PVT mud ring into the wall.

d.At the desired location mark the opening for the larger MLC 104 IP Plus mud ring.

e.Repeat steps b and c.

 

Wall

4.06"

Rotate locking arm

and insert into wall

 

 

opening.

3.75"

 

 

Supplied Mudring for

 

MLC 104 IP Plus

 

Wall Mouting

 

Bracket

Ü Features for MLC Mud Ring Installation

PoleVault IP Systems • Installation — Stage 2 (Wallplates and MLC)

23

Page 27
Image 27
Extron electronic 305SA manual Install the Mud Rings, Insert the PVT mud ring into the wall