Extron electronic 305SA manual Stage Installing the Screen Projector

Stage 1:

Installing the Screen

and Projector

Stage 1 Involves Installing Three Pieces of Hardware Shown Below.

PCM 340 Projector Drop Ceiling Mount A

•Where it goes: Attaches to a structural ceiling, rests on the suspended ceiling.

•What it does: Holds the slotted pipe, PoleVault pole mount kit (PMK 550), and projector.

Pipe Adapter Plate

Wing Nuts (4)

T-bar

Securing

Screws (4)

Slotted Pipe B 1

•Where it goes: Locks into place in the PCM 340 pipe adapter.

•What it does: Holds the PMK 550 pole mount kit, UPB 25 Projector Bracket and projector.

2

UPB 25 Universal Projector Bracket (separated into two sections) C

•Where it goes: Adjuster Plate screws onto the base of

the slotted pipe, and the Projector Bracket attaches to	3
the projector.

• What it does: Attaches the projector to the PCM 340. Allows proper projector positioning and orientation.

1-gang and 2-gang Accessory Mounting	Base
Points (e.g., Power Sockets)
	Plate

Pipe

Adapter

Pipe Adapter

Set Screws (2)

Slotted

Pipe

Adjuster Plate

(Top Section)

PoleVault IP Systems • Installation — Stage 1 (Screen and Projector) 11