Extron electronic manual PVS 204SA Switcher Reference Material

PRELIMINARY

Reference Material

Specifications

NWhere indicated by “†”, the relevant specification is given with the PVS operating as part of a system with proprietary Extron PVT transmitters for this product.

Video — RGB

Gain	Unity †
Crosstalk	-70 dB @ 5 MHz
Switching speed	1 ms (max.) from front panel, 1-2 seconds from remote panel
CMRR	-90 dB @ 100 Hz, -70 dB @ 10 MHz

Video input — RGB

Number/signal type	2 VGA-UXGA RGBHV, RGBS
Connectors	2 pairs female RJ-45 (See chapter 2, “Installation”, “A/V input connections”
	section, for pin configurations.)
Nominal level	0.7 Vp-p for RGB †
Minimum/maximum levels	Analog: 0.3 V to 1.5 Vp-p with no offset †
Impedance	75 ohms †
Horizontal frequency	15 kHz to 145 kHz
Vertical frequency	30 Hz to 170 Hz
DC offset (max. allowable)	1.0 V

Video output — RGB

Number/signal type	1 VGA-UXGA RGBHV, RGBS (follows input type)
Connectors	(1) 15-pin HD female
Nominal level	0.7 Vp-p for RGB †
Minimum/maximum levels	0.3 V to 1.5 Vp-p (follows input)
Impedance	75 ohms
Return loss	<-40 dB @ 5 MHz
DC offset	±5 mV, max., with input at 0 offset

Video — composite video

Gain	Unity †
Differential phase error	0.25º at 3.58 MHz and 4.43 MHz
Differential gain error	0.15% at 3.58 MHz and 4.43 MHz
Switching speed	1 ms (max.) from front panel, 1-2 s from remote panel
CMRR	-90 dB @ 100 Hz, -70 dB @ 10 MHz

Video input — composite video

Number/signal type	2 composite video
Connectors	2 female RJ-45 (See chapter 2, “Installation”, “A/V input connections”
	section, for pin configurations.)
Nominal level	1 Vp-p for composite video (including sync) †
Minimum/maximum levels	Analog: 0.4 V to 2.0 Vp-p with no offset
Impedance	75 ohms
Return loss	<-40 dB @ 5 MHz
DC offset (max. allowable)	1.0 V

A-2 PVS 204SA Switcher • Reference Material