J | Amplified Out — Wire and connect the supplied |
| connector to this port, marked “L” and “R” (left and right) for |
| 4 or 8 ohm speaker output. |
AMPLIFIED OUTPUTS | |
| 4/8 Ohms |
L | R |
CDo not tie both L and R outputs to each other and/or to ground. Doing so will short out the outputs and damage the amplifier.
NThe speaker setup covers two individual speakers of 8 ohm impedance or two pairs of speakers in parallel where each channel drives a maximum output load of 4 ohms
Speaker Configuration
Speaker arrangement examples
Ceiling and program speakers can be arranged several different ways.
The following factors affect the choice of speaker placement:
•Dimensions of the room
•Room acoustics
•Desired evenness of sound coverage
•Audience mobility (whether the audience will be seated or not)
•Ambient noise level
•Type of music or other audio source
Some general ideas for speaker placement are included below.
Program Speakers
Ceiling
Speakers
Classroom Top View | Classroom Top View |
2 Front Program Speakers | 4 Ceiling Speakers |
