5725A
Instruction Manual
CURRENT |
AMPLIFIER |
(A2) |
BRIDGE |
RECTIFIER |
HEAT SINK |
DRESS CABLES |
AS SHOWN |
aq18f.eps |
Figure 6-6. Correct Way to Dress Cables
Accessing the High Voltage Amplifier (A3) |
|
The High Voltage Amplifier assembly lays flat on the top of the instrument, toward the rear. To access the High Voltage Amplifier assembly, simply do the Initial Access Procedure. This leaves the assembly in the service position.
Note
When reinstalling the assembly, lower it into place squarely to make sure its connector seats correctly in the Interconnect assembly connector.