![Selecting Line Voltage](/images/new-backgrounds/15349/1534981x1.webp)
Installation 2
Selecting Line Voltage
Selecting Line Voltage |
The 5725A arrives from the factory configured for the line voltage normally appropriate for the country of purchase, or as specified at the time of purchase. Check the line power label on the rear panel of the 5725A to verify that the line voltage matches local line power. Figure
The 5725A can be set to operate from eight different nominal line voltages; each voltage setting has a voltage tolerance of ±10% and a frequency range of 47 to 63 Hz. The line voltage switches are located on the bottom left side of the rear panel.
To change the line voltage setting, set the line voltage selection switches to the correct setting shown in Figure
CAUTION FOR FIRE PROTECTION
REPLACE ONLY WITH A 250V FUSE
OF INDICATED RATING.
VOLTAGE | FUSE | |
SELECTION | ||
|
S2 | S3 | S4 |
100V |
| ! |
110V |
| F8A 250V |
115V |
| (FAST) |
120V |
|
|
S2 S3 S4
200V 220V
230V
240V
!
F4A 250V
(FAST)
WARNING GROUNDING
CONNECTOR IN POWER CORD
MUST BE CONNECTED TO
ENSURE PROTECTION FROM
ELECTRONIC SHOCK.
!
FUSE
CHASSIS
GROUND
S2
CAUTION FOR FIRE PROTECTION REPLACE ONLY WITH A 250V FUSE OF INDICATED RATING.
VOLTAGE | FUSE |
SELECTION |
S2 | S3 | S4 |
100V |
| ! |
110V |
| F8A 250V |
115V |
| (FAST) |
120V |
|
|
S2 | S3 | S4 |
200V |
| ! |
220V |
| F4A 250V |
230V |
| (FAST) |
240V |
|
|
S3 |
| S4 |
JOHN FLUKE MFG. CO., INC.
MADE IN U.S.A.
PATENTS PENDING
CURRENT
NO INTERNAL USER SERVICEABLE
PARTS REFER SERVICE TOOUTPUT QUALIFIED SERVICE PERSONNEL
TO CLEAN FILTER
REMOVE FROM INSTRUMENTHI AND FLUSH WITH WARM
SOAPY WATER
11A MAX
20V PK | LO |
MAX |
|
5700A CALIBRATOR
CALIBRATION
ENABLE NORMAL
aq4f.eps
Figure