Introduction and Specifications

1

 

How to Use the Manuals

How to Use the Manuals

1-3.

 

The following paragraphs describe how each manual addresses the 5725A.

5725A Instruction Manual

1-4.

Use the 5725A Instruction Manual for installing the 5725A, learning about its front and rear panel features, and for all service-related topics such as maintenance, troubleshooting, parts lists, and schematics. (The 5725A Instruction Manual is the service and operator manual for the 5725A.)

Although the instruction manual also contains a section devoted to 5725A operating notes, once the 5725A is up and running you will find that the 5700A Operator Manual contains most of the information you need to operate the 5725A.

5700A Operator Manual

1-5.

The 5700A Operator Manual contains the following information pertaining to the 5725A:

Specifications for both the 5700A and 5725A (these same specifications are in this Instruction Manual)

Cable connections to a UUT for amplified voltage and current

Front panel (local) operation

Remote control operation, IEEE-488 or RS-232

Self calibration

Fault codes (these appear on the 5700A Control Display, or are read from the 5700A in remote control operation)

Calibration constant symbolic names

Glossary of calibration-related terms

The 5700A Operator Manual comes with two pocket-sized booklets: one for front panel operation and one for remote programming.

5700A Operator Reference Guide

1-6.

The 5700A Operator Reference Guide contains a summary of operating instructions from the Operator Manual. This booklet contains information needed to start up and operate the 5700A, but since the 5700A controls the 5725A, much of this information applies to the 5725A. The booklet is included in the binder with the 5700A Operator Manual.

5700A Remote Programming Reference Guide

1-7.

The 5700A Remote Programming Reference Guide contains a summary of remote commands for the 5700A. It also contains information needed to determine system status using the status byte and registers. Remote commands and system status apply to a 5725A under control of the 5700A. This booklet is also included in the binder with 5700A Operator Manual.

1-5

Page 21
Image 21
Fluke 5725A instruction manual How to Use the Manuals, 5700A Operator Manual, 5700A Operator Reference Guide

5725A specifications

The Fluke 5725A is a high-performance, multifunctional temperature calibration source designed to meet the demanding requirements of laboratory and industrial environments. Renowned for its accuracy, reliability, and versatility, the 5725A serves as a powerful tool for engineers and technicians engaged in temperature calibration processes.

At the core of the 5725A is its advanced measurement technology, which allows for precision temperature calibrations across a wide range. With an operating temperature range from -200°C to 660°C, it caters to various applications, making it suitable for calibrating thermocouples, resistance temperature detectors (RTDs), and other temperature measurement devices.

One of the standout features of the Fluke 5725A is its outstanding accuracy, boasting a specified uncertainty of just ±0.15°C. This level of precision ensures that users can maintain compliance with regulatory standards and regulatory requirements in fields such as aerospace, pharmaceuticals, and manufacturing.

The Fluke 5725A is equipped with dual-channel capabilities, allowing users to calibrate two devices simultaneously. This enhances productivity by minimizing downtime and optimizing workflow efficiency. The intuitive touchscreen interface simplifies operations, enabling users to view measurements, set up test parameters, and access historical data with ease.

Versatile connectivity options such as USB and Ethernet enable seamless integration into existing systems and allow for data transfer, remote control, and configuration. This feature empowers technicians to conduct calibrations efficiently, whether on-site or remotely.

The robust design of the Fluke 5725A ensures its durability in demanding environments. Built with high-quality materials, it is resistant to shocks and vibrations, making it suitable for use in manufacturing plants and laboratories where equipment may be subjected to harsh conditions.

Another notable characteristic of the 5725A is its ability to generate stable temperature outputs with minimal drift, contributing to consistency in calibration results. Its built-in self-test functionality helps ensure that the unit remains in peak operating condition, giving users confidence in their calibration processes.

In summary, the Fluke 5725A is a top-tier temperature calibration source that excels in accuracy, reliability, and user-friendliness. Whether in laboratory settings or industrial applications, its advanced technologies and features make it an essential tool for professionals tasked with maintaining precision in temperature measurements.