
config pbx did | FortiGate Voice VoIP, PBX, and PSTN CLI Reference |
Variables | Description | Default |
|
|
|
edit | Enter the name for the dial plan. If you entering an existing | No |
<pbx_dialplan_name> | dial plan, select Tab to get to the dial plan that you want to | default |
| edit. |
|
comments | Optionally enter a description of the dial plan. | No |
<comment_string> |
| default |
config rule | Configure a new dial plan rule. | No |
|
| default |
edit <rule_name_str> | Enter the name of the dial plan rule to configure. | No |
|
| default |
action {allow | Set the action to allow if this dial plan rule should allow a | No |
block} | call. Set the action to block if the dial plan should block a | default |
call. For example, if you want to block international calls |
| |
| you could set the Phone Number begin with to 011 and set |
|
| the action to block. |
|
|
|
|
callthrough {fxo1 | Select one or more destinations that the dial plan rule | No |
fxo2 fxo3 fx04 | sends outgoing calls to. fxo1, fxo2, fxo3, and fx04 are | default |
<voip_providers>} | the 4 PSTN interfaces. <voip_providers> are the VoIP |
|
providers added to the FortiGate Voice. A dial plan rule |
| |
| can send calls to one or more destinations. |
|
|
|
|
If you set | null | |
<pattern_str> | can enter a different outgoing prefix for this dial plan. |
|
Enter the leading digits of the phone number that this dial | null | |
<patern_str> | plan rule should match with. For example, a dial plan rule |
|
for toll free numbers in North America should begin with |
| |
| 18. The FortiGate Voice uses a best match to match a |
|
| dialed number with a dial plan. So each dial plan should |
|
| have a different Phone number Begin with setting. But you |
|
| should plan your dial plan to make sure that unexpected |
|
| matches do not occur. |
|
|
|
|
prepend | Add digits that should be prepended or added to the | null |
<pattern_str> | beginning of the dialed number before the call is |
|
forwarded to its destination. You can prepend digits at the |
| |
| beginning of a call of special dialing is required to reach |
|
| and external phone system. |
|
|
|
|
Select yes if the dial plan rule should use the default | yes | |
outgoing prefix (usually 9). Select no to add a different |
| |
yes} |
| |
|
|
config pbx did
Use this command to configure Direct Inward Dialing (DID). DID allows calls from external phone systems to dial directly to extensions added to the FortiGate Voice unit.
Syntax
config pbx did
edit <pbx_did_name>
set
set
end
FortiGate Voice Version 4.0 MR1 Administration Guide
5001-410-112851-20100601http://docs.fortinet.com/ • Feedback