Example FortiGate Voice branch office configuration | Configuring basic FortiGate Voice network and UTM settings |
Advanced | Select |
DNS Server 1 | 172.20.120.10 |
4Change other settings if required and select OK.
To configure FortiGuard services for the FortiGate Voice unit
Use the following procedure to configure the FortiGate Voice unit to connect to the FortiGuard Distribution Network (FDN) to update the antivirus, antispam and IPS attack definitions. Before you can begin receiving updates, you must register the FortiGate Voice unit from the Fortinet Support web site. For more information, see “Registering your Fortinet product” on page 15.
1Go to System > Maintenance > FortiGuard.
2Select the expand arrow for AntiVirus and IPS Options to expand the options.
3Select Update Now to update the FortiGuard services and definitions.
If the connection to the FDN is successful, the
Your update request has been sent. Your database will be updated in a few minutes. Please check your update page for the status of the update.
After a few minutes, if an update is available, the FortiGuard page lists new version information for the FortiGate services and definitions. The system dashboard license information widget also displays new dates and version numbers for the FortiGuard definitions. Messages are recorded to the event log indicating whether the update was successful or not.
To configure basic Internet access and UTM features
This procedure describes how to add a firewall policy that allows users on the internal network to connect to the Internet. The firewall policy includes the scan protection profile to apply UTM features, in this case virus scanning, to this traffic. This configuration is not required for VoIP support. It just provides users on the internal network with UTM- protected access to the Internet.
1Go to Firewall > Policy and select Create New to add a new firewall policy.
2Configure the following settings.
Source Interface/Zone | internal |
Source Address | all |
Destination Interface/Zone | want |
Destination Address | all |
Schedule | always |
Service | ANY |
Action | ACCEPT |
3Select Protection Profile and select the scan protection profile to apply UTM virus scanning to the traffic accepted by the firewall policy.
4Select OK to save the firewall policy.
FortiGate Voice Version 4.0 MR1 Administration Guide
