Freescale Semiconductor, Inc.
MMDS Target Component
4.5 Loading the MMDS0508 Target
computer to be a data terminal, so that it sends data on the TxD lead and receives data on the RxD lead (as shown in Figure 4.2 and as the MMDS0508 hardware manual explains).
Figure 4.2 Hardware connection
4.5 Loading the MMDS0508 Target
Usually, the PROJECT.INI file specifies the target. To make the MMDS the target, change the file’s “Target=” line to “Target=Motosil”. The MotoSIL driver automatically detects the MMDS. However, if the driver detects nothing, an error message informs you that the target is not connected to the expected port. Additionally, the Communications Device Specification dialog box appears, so that you can set the correct
Another way to load the MMDS0508 target is selecting Set Target... from the Component Menu (below) as shown in Figure 4.3, then choosing MotoSIL from the list of possible targets.
Figure 4.3 | Set Target |
MMDS0508 Target Interface |
For More Information: www.freescale.com
