Using the Menus: Shooting Mode

DWHITE BALANCE

For natural colors, choose a setting that matches the light source (for an explanation of “white bal- ance,” see the Glossary on page 122). This option is available in P, S, M, C, and SP (X) modes.

OptionDescription

AUTO White balance adjusted automatically.

hMeasure a value for white balance (pg. 82). i For subjects in direct sunlight.

j For subjects in the shade.

k Use under “daylight” fl uorescent lights. l Use under “warm white” fl uorescent lights. m Use under “cool white” fl uorescent lights. n Use under incandescent lighting.

If AUTO does not produce the desired results (for example, when taking close-ups), select h and measure a value for white balance (pg. 82) or choose the option that matches the light source.

1Notes

•At settings other than h, auto white balance is used with the fl ash. Lower the fl ash (pg. 28) to take pic- tures at other settings.

•Results vary with shooting conditions. Play pictures back after shooting to check colors in the monitor.

Menus

81