Fujitsu FR30 14.8 General Control Register 2 (GCN2)

314
CHAPTER 14 PWM TIMER
14.8 General Control Register 2 (GCN2)
The general control register 2 (GCN2) is used for generating a start trigger by software.
■General Control Register 2 (GCN2)
The configuration of the general control register 2 (GCN2) is shown below.
When an EN bit of this register is selected by the general co ntr ol regi ste r 1 ( GC N1), the value of
this register is transmitted as is to the PWM timer trigger i nput.
Multiple PWM timer channels can be activated simultaneously by making softwa re generat e the
edge selected by the EGS1 and EGS0 bits of the control statu s register.
Always set bits 7 to 4 of this register to "0".
GCN2 bit 76543210
Address: 0000DF H
EN3 EN2 EN1 EN0
R/W R/W R/W R/W R/W R/W R/W R/W
00000000
Attribute
Initial value