Manuals / Fujitsu / Computer Equipment / Computer Drive

Fujitsu MCM3130AP, MCM3064AP manual Specifications of Optical Disk Drives, 2 Specifications 2 of

Models: MCM3130AP MCM3064AP

1 202

Download 202 pages 27.76 Kb

Page 35

2.1 Specifications of Optical Disk Drives

2.1 Specifications of Optical Disk Drives

Table 2.2 Specifications (2 of 2)

Item			Specifications

Optical disk media	128 MB media	230 MB media	540 MB media	640 MB media	1.3 GB media (*6)

Data buffer	1,844 KB

Error correction (*5)	Correctable up to 8-byte/interleave
	Bit error rate: 10-12or less

*1 The number of user tracks indicates the maximum user zone which includes the spare area and slipping area.

*2 Mathematical average of 1,000 times of random seek, which does not include command overhead or track address recognition time. Furthermore, it may depend on the quality of the media and the drive installation environment.

*3 Loading time is the time that elapses from the time an optical disk cartridge is inserted, to the time the optical disk drive is ready for processing of an access command.

*4 Unloading time is the time that elapses from the time the eject button is pressed or the eject command is issued, to the time an optical disk cartridge is ejected.

*5 The bit error rate must be 10-12or less using a disk whose raw error rate is 10-4or less.

*6 The MCM3064AP does not support 1.3-gigabyte MO disks.

C156-E227-01EN

2-3

Image 35

Fujitsu MCM3130AP, MCM3064AP manual Specifications of Optical Disk Drives, 2 Specifications 2 of

Contents

C156-E227-01EN MCM3064AP, MCM3130AP OPTICAL DISK DRIVES PRODUCT MANUALHandling of This Manual FOR SAFE OPERATIONRevised section *1 Revision HistoryEdition DateThis page is intentionally left blank Chapter 6 Diagnostics and Maintenance Chapter 2 SpecificationsChapter 3 Installation Requirements Chapter 5 Operation and CleaningAcronyms and Abbreviations CONVENTIONS USED IN THIS MANUALPreface GlossaryPreface Conventions for Alert MessagesThis page is intentionally left blank Device damage Important Alert ItemsImportant Alert Messages C156-E227-01EN Important Alert ItemsC156-E227-01EN 1. GENERAL DESCRIPTION 2. SPECIFICATIONS 3. INSTALLATION REQUIREMENTS4. HOST INTERFACE 5. OPERATION AND CLEANING 6. DIAGNOSTICS AND MAINTENANCEIEC= REFERENCED STANDARDS1 ISO= International Organization for StandardizationCHAPTER ContentsSpecifications Installation RequirementsCHAPTER ContentsHost Interface Post-installation Operation Check and Preparation for UsePREVENT/ALLOW MEDIUM REMOVAL command ContentsContents CHAPTER 5 Operation and CleaningCHAPTER 6 Diagnostics and Maintenance Contents IllustrationsFIGURES Bit definitions of ATAPI Status register TABLESBit definitions of ATAPI Features register Bit definitions of ATAPI Block Device Select registerTable 4.17 Command codes and parameters ContentsTable 4.86 READ CAPACITY data PMI=1, PROM medium Table 4.65 Removable Block Access Capabilities Page default valueTable 4.79 PREVENT/ALLOW MEDIUM REMOVAL command 4-72 Contents1.1.1 Performance and Functions 1.1 FeaturesCHAPTER 1 General Description General Description 1.1.4 Adaptability 1.1 Features1.1.2 Reliability 1.1.3 Maintainability/operabilityGeneral Description 1.1.5 Interface4 Read-ahead cache feature 1.1 FeaturesFigure 1.2 The optical disk drive without panel 1.2 Configuration of Optical Disk Drive1.2.1 Appearance Figure 1.1 The optical disk drive with panel1.2.3 Mechanical section 1.2.2 Configuration1.2 Configuration of Optical Disk Drive Figure 1.3 Configuration of optical disk driveGeneral Description 1.2.4 Control circuit section1.2 Configuration of Optical Disk Drive Figure 1.4 Block diagram of the control circuit sectionThis page is intentionally left blank Table 2.1 Representative model names and order numbers CHAPTER 2 Specifications2.1 Specifications of Optical Disk Drives 2.1.1 Catalog and order numbersTable 2.2 Specifications 1 of 2.1.2 Specifications of drivesSpecifications Table 2.2 Specifications 2 of 2.1 Specifications of Optical Disk DrivesSpecifications 2.1.3 Environmental and power requirementsTable 2.3 Environmental and power requirements 1 of 2.1 Specifications of Optical Disk Drives 2.1.4 Error rateTable 2.3 Environmental and power requirements 2 of Specifications 2.1.5 ReliabilityData loss Table 2.4 Recommended optical disk cartridges 2.2 Specifications of Optical Disk Cartridges2.2 Specifications of Optical Disk Cartridges 2.2.1 Recommended optical disk cartridgesSpecifications 2.2.2 AppearanceFigure 2.1 Optical disk cartridge 1/2 Figure 2.1 Optical disk cartridge 2/21 Cartridge case 2.2 Specifications of Optical Disk CartridgesSpecifications 2.2.3 Specifications of diskTable 2.5 Disk specifications Figure 2.2 Algorithms for alternate processing 2.3.1 Defect management schematic diagram2.3 Defect Management 2.3 Defect ManagementSpecifications Figure 2.3 Example of alternate processing3.1 Environmental Requirements CHAPTER 3 Installation Requirements3.1.1 Temperature measurement points Table 3.1 Temperature requirements at measurement points 3.1.2 Temperature requirementsInstallation Requirements Figure 3.1 Surface temperature measurement pointTable 3.2 Temperatures at measuring points Reference 3.1.3 Temperature rise3.1.4 Air cleanliness 3.2.1 Outer dimensionsC156-E227-01EN Figure 3.2 Outer dimensions 1/2Installation Requirements 3.2 Mounting Requirements Figure 3.2 Outer dimensions 2/2C156-E227-01EN Figure 3.3 Outer dimensions 1/3Installation Requirements Oblong hole 2±0.1 width ⋅ 2.5±0.1 length Width of C Details of C part Figure 3.3 Outer dimensions 2/3Stroke for the switch Details on D part 3.2 Mounting RequirementsC156-E227-01EN Figure 3.3 Outer dimensions 3/3Installation Requirements 3.2 Mounting Requirements 3.2.2 Installation directionFigure 3.4 Installation directions Installation Requirements 3.2.3 Center of gravityFigure 3.5 Center of gravity 3.2 Mounting Requirements 3.2.4 Precautions on mountingFigure 3.6 Mounting frame structure Installation Requirements Figure 3.7 Service areasFigure 3.8 MCM3130AP current waveform +5 VDC 3.3 Power Supply Requirements3.3 Power Supply Requirements Installation Requirements 3.4.1 Drive connectorsFigure 3.9 Connector and terminal locations 3.4 Cable Connections3.4 Cable Connections 3.4.2 Cable connector specificationsTable 3.3 Cable connector specifications Figure 3.11 Jumper wire settings at factory shipment 3.5 Jumper Settings3.5.1 Factory shipment settings Figure 3.10 Cable connection diagramFigure 3.13 Slave device setting 3.5.2 Mode settings3.5 Jumper Settings Figure 3.12 Master device settingInstallation Requirements Figure 3.14 Cable selection mode settingFigure 3.15 Cable selection example Device damage 3.6 Precautions on Handling of Drive3.6 Precautions on Handling of Drive 3 Installation Installation RequirementsPacking box for each individual unit Figure 3.16 Packing styles 1/23.6 Precautions on Handling of Drive Drive Holder Desiccant Ejecting jig BoxDrive Desiccant Holder Ejecting jig Carton of packing boxes Figure 3.16 Packing styles 2/2Installation Requirements 3.7 Mounting of Drive 3.7.1 Mounting procedure3.7 Mounting of Drive Installation Requirements 3.9 Post-installation Operation Check and Preparation for Use3.8 Cable Connections 3.9.1 Initial operation check3.9.2 Connection check 3.9 Post-installation Operation Check and Preparation for UseInstallation Requirements 3.10 Demounting of DriveThis chapter describes host interface specification CHAPTER 4 Host Interface4.1 Pin Assignment 4.2 Signal Description 4.3 Interface Registers 4.4 Various Processes 4.5 ATA Commands 4.6 Packet Commands 4.7 TimingHost Interface Table 4.1 Connector pin assignments 1/24.1 Pin Assignment 4.1 Pin Assignment Table 4.1 Connector pin assignments 2/2Host Interface 4.2 Signal DescriptionTable 4.2 Signal description 1/2 Table 4.2 Signal description 2/2 4.2 Signal DescriptionHost Interface 4.3 Interface Registers4.3.1 I/O registers Table 4.3 I/O port functions and mappingTable 4.4 Bit definitions of Alternate Status register 4.3.1.2 ATA Command register4.3 Interface Register 4.3.1.1 Alternate Status registerTable 4.7 Bit definitions of ATAPI Byte Count register 4.3.1.5 Drive Address registerTable 4.6 Bit definitions of Drive Address register 4.3.1.6 ATAPI Byte Count registerTable 4.8 Bit definitions of ATAPI Block Device Select register 4.3.1.8 Error registerTable 4.9 Bit definitions of Error register 4.3.1.7 ATAPI Block Device Select register4.3.1.11 ATA Sector Count register 4.3.1.9 ATA Features register4.3.1.10 ATAPI Features register Table 4.10 Bit definitions of ATAPI Features registerTable 4.13 Bit definitions of ATAPI Status register Table 4.12 I/O and C/D4.3.1.13 Sector Number register 4.3.1.14 ATAPI Status registerThe ODD sets BSY Host Interface4.4 Various Processes 4.4.1 Reset response4.4 Various Processes Host Interface 4.4.2 Defect sector management4.4.3 Automatic alternate sector assignment function Table 4.14 Alternate sector assignment criteria4.4 Various Processes 4.4.4 Data error detection criteriaHost Interface 4.4.5 Cache function4.4.5.1 Data buffer 4.4.5.2 Read cache4.4 Various Processes 4.4.5.3 MO write cacheHost Interface 4.4.7 Power management function4.4.6 Media status notification function 4.4.7.4 Idle mode 4.4.7.1 Power mode4.4.7.2 Active mode 4.4.7.3 Pre-idle modeHost Interface 4.4.7.5 Standby mode4.4.7.6 Sleep mode 4.4.7.7 Standby timerMedia is inserted 4.4.7.8 Power mode transitionFigure 4.1 Power mode 4.4 Various ProcessesHost Interface 4.4.8 LED IndicationsTable 4.16 LED indications Table 4.17 Command codes and parameters 4.5 ATA Commands4.5 ATA Commands Host Interface 4.5.1 IDENTIFY PACKET DEVICE A1hTable 4.18 IDENTIFY PACKET DEVICE command 4.5 ATA Commands Table 4.19 Device parameter information 1/5Host Interface Table 4.19 Device parameter information 2/54.5 ATA Commands Table 4.19 Device parameter information 3/5Host Interface Table 4.19 Device parameter information 4/5Command set supported and whether the function is enabled or Table 4.19 Device parameter information 5/54.5 ATA Commands Host Interface Table 4.20 PACKET command4.5.2 PACKET A0h 4.5 ATA Commands 4.5.3 DEVICE RESET 08hTable 4.21 DEVICE RESET command Host Interface 4.5.4 CHECK POWER MODE E5hTable 4.23 Power mode indication When device 1 is connected 4.5.5 EXECUTE DEVICE DIAGNOSTIC 90h4.5 ATA Commands When no device 1 is connectedHost Interface Table 4.26 GET MEDIA STATUS command4.5.6 GET MEDIA STATUS DAh Table 4.25 Self-diagnosis detailed code4.5 ATA Commands Table 4.27 Error registerTable 4.28 IDLE IMMEDIATE command 4.5.7 IDLE IMMEDIATE 95h/E1h4.5.8 NOP 00h 4.5.9 SERVICE A2hTable 4.29 NOP command Table 4.30 SERVICE command4.5 ATA Commands 4.5.10 SET FEATURES EFhTable 4.31 SET FEATURES command Host Interface Table 4.32 FR register setting value4.5 ATA Commands Table 4.33 Transfer setting values in the SC registerLOCK Table 4.34 Cylinder High registerPOWEREJ Host Interface4.5 ATA Commands Table 4.35 SLEEP command4.5.11 SLEEP 99h/E6h Host Interface 4.5.12 STANDBY IMMEDIATE 94h-E0hTable 4.36 STANDBY IMMEDIATE command Table 4.37 Packet command codes and parameters 4.6 Packet Commands4.6 Packet Commands Host Interface 4.6.2 ERASE commandTable 4.38 ERASE command 4.6.1 Logical Unit Number4.6 Packet Commands 4.6.3 FORMAT UNIT commandTable 4.39 FORMAT UNIT command Table 4.40 FORMAT UNIT parameter listHost Interface 4.6.4 INQUIRY commandTable 4.43 INQUIRY command Format DescriptorPeripheral Device Type Optical memory Device 07h Table 4.44 INQUIRY data4.6 Packet Commands Host Interface 4.6.5 MODE SELECT commandTable 4.45 MODE SELECT command Table 4.46 Mode parameters4.6 Packet Commands Table 4.47 Mode parameter listTable 4.48 Mode parameter header Table 4.49 Block descriptorHost Interface 4.6.5.1 Drive Operation Mode PageTable 4.50 Page Descriptor Table 4.51 Drive Operation Mode PageTable 4.53 Drive Operation Mode Page default value Table 4.52 Drive Operation Mode Page variable4.6.5.2 Read-Write error recovery page 4.6 Packet CommandsHost Interface Table 4.55 Changeable values in the read-write recovery pageTable 4.57 Flexible disk page Table 4.56 Default values for the read-write recovery page4.6.5.3 Flexible disk page 4.6 Packet CommandsHost Interface Table 4.58 Changeable values in flexible disk pageNumber of LBA for media / 40h ⋅ Table 4.59 Default values in flexible disk page4.6 Packet Commands Others or Not Ready = 200hHost Interface 4.6.5.4 Caching page Table 4.60 Caching pageTable 4.61 Changeable values in the caching page Table 4.62 Default values for the caching page4.6 Packet Commands 4.6.5.5 Removable Block Access Capabilities PageTable 4.63 Removable Block Access Capabilities Page Table 4.64 Removable Block Access Capabilities variableHost Interface Table 4.65 Removable Block Access Capabilities Page default value4.6.5.6 Timer & Protect Page Table 4.66 Timer & Protect Page4.6 Packet Commands Table 4.67 Inactivity Timer Multiplier valuesHost Interface 4.6.6 MODE SENSE 10 commandTable 4.68 Timer & Protect Page variable Table 4.70 MODE SENSE 10 command4.6 Packet Commands Table 4.72 Mode Parameter ListTable 4.73 Mode Parameter Header Table 4.71 Page Control fieldHost Interface Table 4.74 Page DescriptorTable 4.78 Mode parameter header 4.6.7 MODE SENSE 6 commandTable 4.76 MODE SENSE 6 command Table 4.77 Mode parameter listHost Interface 4.6.8 PREVENT/ALLOW MEDIUM REMOVAL commandTable 4.79 PREVENT/ALLOW MEDIUM REMOVAL command Table 4.80 Response to Prevent/Allow/EjectTable 4.82 READ command 4.6.9 READ 10 command4.6.10 READ 12 command Table 4.81 READ 10 commandTable 4.85 READ CAPACITY data PMI=1, MO media, FROM medium 4.6.11 READ CAPACITY commandTable 4.83 READ CAPACITY command Table 4.84 READ CAPACITY data PMI=0Table 4.88 READ FORMAT CAPACITIES data format 4.6.12 READ FORMAT CAPACITIES commandTable 4.87 READ FORMAT CAPACITIES command Table 4.86 READ CAPACITY data PMI=1, PROM mediumTable 4.91 Descriptor code definition 4.6.13 READ DEFECT DATA commandTable 4.92 READ DEFECT DATA command Table 4.90 Current/Maximum capacity descriptorTable 4.95 Defect Descriptor Table 4.93 Defect List FormatTable 4.94 Defect List Header 4.6 Packet CommandsTable 4.97 RECEIVE DIAGNOSTIC RESULTS command 4.6.14 READ LONG command4.6.15 RECEIVE DIAGNOSTIC RESULTS command Table 4.96 READ LONG command4.6 Packet Commands 4.6.16 REQUEST SENSE commandTable 4.98 REQUEST SENSE command Host Interface Table 4.100 Error codeTable 4.99 Request sense data Indicates that reset, power-on, or media exchange is caused Table 4.101 Sense Key codeTable 4.102 Logical block address format 4.6 Packet CommandsASCQ Table 4.103 ASC/ASCQ list 1/2Host Interface Sense4.6 Packet Commands Table 4.103 ASC/ASCQ list 2/2Table 4.104 Format Progress Indication Bytes Table 4.106 SEEK command 4.6.17 SEND DIAGNOSTIC command4.6.18 SEEK command Table 4.105 SEND DIAGNOSTIC command4.6 Packet Commands 4.6.19 START/STOP UNIT commandTable 4.107 START/STOP UNIT command Table 4.108 START/STOP/EJECT processingTable 4.110 TEST UNIT READY command 4.6.20 SYNCHRONIZE CACHE command4.6.21 TEST UNIT READY command Table 4.109 SYNCHRONIZE CACHE commandTable 4.112 WRITE 10 command 4.6.22 VERIFY command4.6.23 WRITE 10 command Table 4.111 VERIFY commandHost Interface 4.6.24 Write 12 commandTable 4.113 Write 12 command 4.6 Packet Commands 4.6.25 WRITE AND VERIFY commandTable 4.114 WRITE AND VERIFY command Host Interface 4.6.26 WRITE BUFFER commandTable 4.115 WRITE BUFFER command 4.6 Packet Commands Table 4.116 Code-IDHost Interface 4.6.27 WRITE LONG commandTable 4.117 WRITE LONG command Figure 4.2 Register/PIO data transfer 4.7 Timing4.7.1 Register/PIO data transfer timing 4.7 TimingHost Interface Table 4.118 Register/PIO data transfer timing parameters4.7 Timing 4.7.2 Multiword DMA data transfer timingFigure 4.3 Multiword DMA data transfer Host Interface Table 4.119 Multiword DMA data transfer timing parametersFigure 4.5 Ultra DMA data in transfer continuous transfer timing 4.7.3 Ultra DMA data in transfer initialization timing4.7.4 Ultra DMA data in transfer continuous transfer timing Figure 4.4 Ultra DMA data in transfer initialization timingFigure 4.7 Ultra DMA data in transfer device end timing 4.7.5 Ultra DMA data in transfer host stop timing4.7.6 Ultra DMA data in transfer device end timing Figure 4.6 Ultra DMA data in transfer host stop timing4.7 Timing 4.7.7 Ultra DMA data in transfer host end timingFigure 4.8 Ultra DMA data in transfer host end timing Figure 4.10 Ultra DMA data out transfer continuous transfer timing 4.7.8 Ultra DMA data out transfer initialization timing4.7.9 Ultra DMA data out transfer continuous transfer timing Figure 4.9 Ultra DMA data out transfer initialization timingDDMARDY 4.7.10 Ultra DMA data out transfer device stop timingFigure 4.11 Ultra DMA data out transfer device stop timing 4.7 TimingHost Interface 4.7.11 Ultra DMA data out transfer host suspend timingFigure 4.12 Ultra DMA data out transfer host suspend timing 4.7 Timing 4.7.12 Ultra DMA data out transfer device end timingFigure 4.13 Ultra DMA data out transfer device end timing Host Interface Table 4.120 Ultra DMA data out transfer parameter4.7 Timing 4.7.13 Power-on and Reset TimingFigure 4.14 Power-on and reset timing 25 ∝ s Table 4.121 Power-on and reset timingHost Interface Figure 5.1 Optical disk drive front view with panel CHAPTER 5 Operation and Cleaning5.1 Operation of Optical Disk Drive 5.1.1 Appearance of optical disk drive5.1.3 Inserting an optical disk cartridge 5.1.2 PrecautionsOperation and Cleaning Figure 5.2 Inserting an optical disk cartridge 5.1 Operation of Optical Disk DriveOperation and Cleaning 5.1.4 Removing an optical disk cartridgeFigure 5.3 Removing an optical disk cartridge 5.2 Cleaning of Optical Disk Drive5.2 Cleaning of Optical Disk Drive Table 5.1 Head cleanerOperation and Cleaning 5.3 Operation of Optical Disk Cartridge5.3.1 Appearance Device DamageFigure 5.4 Appearance of optical disk cartridge 5.3 Operation of Optical Disk CartridgeOperation and Cleaning 5.3.2 Write protect tabFigure 5.5 Write protect tab 5.3 Operation of Optical Disk Cartridge 5.3.3 PrecautionsTable 5.3 Packing list for cleaning kit 5.4 Cleaning the Optical Disk Cartridge5.4.1 Cleaning tool for optical disk cartridge Table 5.2 Cleaning kitFigure 5.6 Opening a shutter 5.4.2 Cleaning of optical disk cartridge5.4 Cleaning the Optical Disk Cartridge Spindle Setting case lid Figure 5.7 Setting an optical disk cartridge into the setting caseFigure 5.8 Placing the setting case cover Operation and CleaningC156-E227-01EN 5.4 Cleaning the Optical Disk Cartridge5-14 Figure 5.9 Cleaning of disk surfaceOperation and Cleaning Cleaning clothTable 6.1 Diagnostics function CHAPTER 6 Diagnostics and Maintenance6.1 Diagnostics 6.1.1 Initial self-diagnosticsDiagnostics and Maintenance 6.2 Maintenance Information6.1.2 Diagnostic command 6.2.1 Maintenance requirementsFigure 6.1 Revision label 6.2 Maintenance Information6.2.2 Revision number Diagnostics and Maintenance Figure 6.2 Revision number indicationGlossary Axial displacementCDB Command Descriptor Block CommandGlossary Error correction codeError detection and correction Recording powerGL-3 StatusGlossary C156-E227-01ENThis page is intentionally left blank Acronyms and Abbreviations Acronyms and Abbreviations data transfer flow IndexIndex Index media, FROM media 4-64 READ CAPACITY data PMI=1, PROM setup data format for Clear Featureenvironment 2-5 power IndexIndex This page is intentionally left blank FOR FUJITSU USE READER’S COMMENT FORMThis page is intentionally left blank