Fujitsu MHA2032AT, MHA2021AT manual Format of device attribute value data, 1FF

Interface

At command completion (I-O registers setting contents)

1F7H(ST)	Status information
1F6H(DH)	×	×	×	DV	xx
1F5H(CH)	Key-failure prediction status (C2h-2Ch)
1F4H(CL)	Key-failure prediction status (4Fh-F4h)
1F3H(SN)	xx
1F2H(SC)	xx
1F1H(ER)	Error information

The attribute value information is 512-byte data; the format of this data is shown below. The host can access this data using the SMART Read Attribute Values subcommand (FR register = D0h). The insurance failure threshold value data is 512-byte data; the format of this data is shown below. The host can access this data using the SMART Read Attribute Thresholds subcommand (FR register = D1h).

Table 5.8 Format of device attribute value data

Byte		Item
00	Data format version number
01
02	Attribute 1	Attribute ID
03		Status flag
04
05		Current attribute value
06		Attribute value for worst case so far
07 to 0C		Raw attribute value
0D		Reserved
0E to 169	Attribute 2 to	(The format of each attribute value is the same
	attribute 30	as that of bytes 02 to 0D.)
16A to 16F	Reserved
170	Failure prediction capability flag
171
172 to 181	Reserved
182 to 1FE	Vendor specific
1FF	Check sum

5-56 C141-E042-01EN