Installation Conditions
(2) Frame
The MR head bias of the HDD disk enclosure (DE) is zero. The mounting frame is connected to SG.
Use M3 screw for the mounting screw and the screw length should satisfy the specification in Figure 3.3.
The tightening torque must not exceed 3 kgcm.
When attaching the HDD to the system frame, do not allow the system frame to touch parts (cover and base) other than parts to which the HDD is attached.
(3) Limitation of
Do not use the center hole. For screw length, see Figure 3.3.
| 2.5 |
| Side surface |
| 2.5 |
Bottom surface mounting |
|
| mounting |
|
|
|
|
|
|
| |
DE | 2.5 |
|
|
|
|
2.5 |
|
|
|
| |
2 |
| PCA | B | ||
A | Frame of system |
|
| ||
Frame of system | cabinet |
|
|
|
|
cabinet |
|
|
|
|
|
3.0 or less | Screw | 3.0 or less | Screw |
| |||
|
|
|
Details of A
Details of B
