FIGURES
|
| page | |
1.1 | Current fluctuation (Typ.) when power is turned on | 1 - 7 | |
2.1 | Disk drive outerview | 2 | - 1 |
2.2 | 1 drive system configuration | 2 | - 3 |
2.3 | 2 drives configuration | 2 | - 3 |
3.1 | Dimensions | 3 | - 2 |
3.2 | Handling cautions | 3 | - 3 |
3.3 | Direction | 3 | - 4 |
3.4 | Limitation of | 3 | - 5 |
3.5 | Mounting frame structure | 3 | - 5 |
3.6 | Surface temperature measurement points | 3 - 6 | |
3.7 | Service area | 3 | - 7 |
3.8 | Connector locations | 3 | - 8 |
3.9 | Cable connections | 3 | - 9 |
3.10 | Power supply connector pins (CN1) | 3 - 10 | |
3.11 | Cable configuration | 3 | - 11 |
3.12 | Cable type detection using CBLID- signal |
|
|
| (Host sensing the condition of the CBLID- signal) | 3 - 12 | |
3.13Cable type detection using IDENTIFY DEVICE data
| (Device sensing the condition of the CBLID- signal) | 3 - 12 | |
3.14 | Jumper location | 3 | - 13 |
3.15 | Factory default setting | 3 | - 14 |
3.16 | Jumper setting of master or slave device | 3 | - 14 |
3.17 | Jumper setting of Cable Select | 3 | - 15 |
3.18 | Example (1) of Cable Select | 3 | - 15 |
3.19 | Example (2) of Cable Select | 3 | - 15 |
4.1 | Head structure | 4 | - 2 |
4.2 | MPG3xxxAT Block diagram | 4 - 5 | |
4.3 | 4 | - 6 | |
4.4 | Block diagram of servo control circuit | 4 | - 12 |
4.5 | Physical sector servo configuration on disk surface | 4 | - 14 |
4.6 | 126 Servo frames in each track | 4 | - 16 |
5.1 | Execution example of READ MULTIPLE command | 5 | - 19 |
5.2 | Read Sector(s) command protocol | 5 - 77 | |
xi |
