Fujitsu MPG3XXXAT manual Information to be read by Identify Device command 3, X3FFF

Table 5.5 Information to be read by IDENTIFY DEVICE command (3 of 7)

*1 Word 0: General configuration
Bit 15:	0	= ATA device	0
Bit 14-8:	Vendor specific		0
Bit 7:	1	= Removable media device	0
Bit 6:	1	= not removable controller and/or device	1
Bit 5-1:	Vendor specific		0
Bit 0:	Reserved		0

*2 Number of Cylinders ,				*3 Number of Heads,
*11	Total number of user addressable sectors (LBA mode only.)
		MPG3102AT	MPG3153AT		MPG3204AT	MPG3307AT	MPG3409AT
*2		X'3FFF'		←	←	←	←
*3		X'10'		←	←	←	←
*11		X'01316AF0'	X'01CA1E70'		X'0262D5E0'	X'03943CE0'	X'04C5ABC0'

*4 Word 10-19: Serial number; ASCII code (20 characters, right-justified)

*5 Word 23-26: Firmware revision; ASCII code (8 characters, Left-justified)

*6 Word 27-46: Model number;

ASCII code (40 characters, Left-justified), remainder filled with blank code (X'20') One of the following model numbers;

MPG3102AT, MPG3153AT, MPG3204AT, MPG3307AT, MPG3409AT

*7	Word 49:	Capabilities
	Bit 15-14:	Reserved
	Bit 13:	Standby timer value 0 = Standby timer values shall be managed by the device
	Bit 12:	Reserved
	Bit 11:	IORDY support	1	= Supported
	Bit 10:	IORDY inhibition	0	= Disable inhibition
	Bit 9:	LBA support	1	= Supported
	Bit 8:	DMA support	1	= Supported
	Bit 7-0:	Vendor specific
*8	Word 51: PIO data transfer mode
	Bit 15-8:	PIO data transfer mode	X'04' = PIO mode 4
	Bit 7-0:	Vendor specific
*9 Word 53: Enable/disable setting of word 54-58 ,64-70 and 88
	Bit 15-3:	Reserved
	Bit 2:	Enable/disable setting of word 88			1 = Enable
	Bit 1:	Enable/disable setting of word 64-70			1 = Enable
	Bit 0:	Enable/disable setting of word 54-58			1 = Enable

C141-E110-02EN 5 - 31